Velocity ATB Lightweight Disc 100mm Front hub
Hub Data | ||
---|---|---|
Manufacturer | Velocity | |
Model | ATB Lightweight Disc | |
Descriptor | ||
Position | Front | |
Axle Type | 9mm | |
OLN | 100 mm | |
Spoke Interface Type | J-Bend | |
Brake Compatibility | disc, 6-bolt | |
Drive Interface | n/a (front) | |
Internal Gearing | none | |
Dynamo Type | none | |
Spoke Hole Diameter | 2.8 mm | |
Left Flange Diameter | 57.5 mm | |
Right Flange Diameter | 44.5 mm | |
Left Flange Offset | 22 mm | |
Right Flange Offset | 36 mm | |
Mid-Flange Offset | 7 mm (to the right) | |
Weight | 140 g | |
URL | http://www.velocityusa.com/default.asp?c... |
Metadata | ||
---|---|---|
Hub ID | 234 | |
Record Status | Public | |
Created | Aug 8, 2012 11:22am |
8/8/12 -- All measurements taken on a new hub. 154g weight is without the skewer. Velocity's axle and bearing assembly uses a shouldered aluminum axle, cartridge bearings, and aluminum slide-on spacers/caps outside the bearings. The caps are held on by small set screws; strongly recommend greasing the threads and the end of the axle the caps slide onto to prevent corrosion issues later on. They come from the factory assembled dry. -Karl
Part numbers are formatted H08-xx. -Karl
Part numbers are formatted H08-xx. -Karl