Bontrager XXX 29er OSB [622] Rim
| Rim Data | ||
|---|---|---|
| Manufacturer | Bontrager | |
| Model | XXX 29er OSB | |
| Descriptor | ||
| ISO Size | ISO 622 (700c, 29er) | |
| ERD | 606 mm | |
| ERD source | ||
| Offset drilling | 2.5 L, -2.5 R | |
| Rim Bias | -2.5 mm (to the left) | |
| Outer width | 24.7 mm | |
| Inner width | 21.3 mm | |
| Overall height | 16.8 mm | |
| Brake wall height | ||
| Tire Type | clincher | |
| Joint Type | Sleeved | |
| Eyelet type | None | |
| Weight | 340 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Rim ID | 336 | |
| Record Status | Public | |
| Created | Jun 17, 2014 12:05pm | |
6/17/14 -- This data is from an aluminum OEM rim from a rear Bontrager XXX 29er tubeless wheelset. The rim was damaged and replaced with a Stan's Arch EX 29er (ERD 606).
ERD for this Bontrager rim measured at approximately 606mm. (Hard to measure perfectly because rim was slightly ovalized). -Karl
ERD for this Bontrager rim measured at approximately 606mm. (Hard to measure perfectly because rim was slightly ovalized). -Karl