Hope Pro 4 DH 150/157 150mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Hope
Model Pro 4 DH 150/157
Position Rear
Axle Type 12mm thru
OLN 150 mm
Spoke Interface Type J-Bend
Brake Compatibility disc, 6-bolt
Drive Interface Shimano 8/9/10/DynaSys (34.95mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.6 mm
Left Flange Diameter 60 mm
Right Flange Diameter 64 mm
Left Flange Offset 34.3 mm
Right Flange Offset 34.8 mm
Mid-Flange Offset 0.3 mm (to the right)
Weight 0 g
URL https://www.hopetech.com/products/hubs/m...
Hub ID 737
Record Status Public
Created Oct 2, 2020 1:17am
Approved Nov 13, 2020 9:15am
hub dimension diagram
11/13/2020 -- User contrib. Note that the drive side flange overhangs the freehub body some amount, and this hub is intended for use with modern 7-cog DH cassettes (which I believe share cog spacing with 10spd cassettes but omit the largest three cogs). -Karl