Tune MAG 130mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Tune
Model MAG
Position Rear
Axle Type 10mm
OLN 130 mm
Spoke Interface Type J-Bend
Brake Compatibility rim brake
Drive Interface Shimano 11 road (36.75mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.4 mm
Left Flange Diameter 40.9 mm
Right Flange Diameter 55.5 mm
Left Flange Offset 35.5 mm
Right Flange Offset 17 mm
Mid-Flange Offset -9.3 mm (to the left)
Weight 178 g
URL https://www.tune.de/archiv/mag170
Hub ID 641
Record Status Public
Created Apr 1, 2020 3:41am
Approved Mar 11, 2021 12:15pm
hub dimension diagram
Google-translated info from mfg page: "A variant of our classic MAG. The MAG Endurance is equipped with our double-sealed Endurance ball bearings and the reinforced Endurance freehub body. The perfect upgrade for your racer! The special endurance ball bearings are particularly low-maintenance and withstand rain, mud and snow. Otherwise everything stays the same and you get the ideal basis for a light and laterally stiff balance bike that you will have a lot of fun with. All of our hubs are CNC turned and milled, assembled and adjusted by hand on site in Buggingen. The hub body is made of aluminum, which is also used in aviation and has increased strength. All of our hubs are anodized for color diversity and corrosion resistance. Choose endurance bearings, not cleaning ..."

"available as Campagnolo, XD, XDR, Shimano HG10 or HG11"

"Max. Spoke tension : 1100N"
3/11/21 -- User contrib. Values appear to match mfg website, but I have not verified anything on a specimen. I fixed missing decimal point in spoke hole diameter, both PCDs, and left C-F. (values were submitted using commas instead of periods for decimal separators, and the commas were discarded by the validation code) -Karl
part image