DT Swiss 240s 110 mm DBIS oversize 20mm 110mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | DT Swiss | |
| Model | 240s 110 mm DBIS oversize 20mm | |
| Descriptor | "oversize" | |
| Position | Front | |
| Axle Type | 20mm thru | |
| OLN | 110 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.4 mm | |
| Left Flange Diameter | 58 mm | |
| Right Flange Diameter | 52 mm | |
| Left Flange Offset | 22.1 mm | |
| Right Flange Offset | 30.3 mm | |
| Mid-Flange Offset | 4.1 mm (to the right) | |
| Weight | 160 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Hub ID | 545 | |
| Record Status | Public - attention required | |
| Created | Sep 26, 2019 8:34pm | |
User contrib: "data retrieved from DT Swiss Spoke Calculator". (note that there are two very similar entries in the DT calculator, one marked oversize and the other marked BOOST. They have different offset values! Please check your hub carefully before proceeding. -Karl