Novatec D202SB 197mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Novatec | |
| Model | D202SB | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 12mm thru | |
| OLN | 197 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | Shimano 8/9/10/DynaSys (34.95mm) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 58 mm | |
| Right Flange Diameter | 58 mm | |
| Left Flange Offset | 47.3 mm | |
| Right Flange Offset | 47.3 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 366 g | |
| URL | http://novatecusa.net/project/d202sb/ | |
| Metadata | ||
|---|---|---|
| Hub ID | 329 | |
| Record Status | Public | |
| Created | Mar 28, 2017 2:15pm | |
3/28/17 -- Note that mfg's specs list flange to flange as 91mm, which is the inside-to-inside distance and not center-to-center. Also lists an unclarified offset of 6.7mm, but the flanges are symmetrical between the dropout faces (at least with the 12x197 endcaps installed; no 10x190 caps here to check with...) The specimen in my hand (provided by customer) does indeed have a 37mm Shimano 11spd road freehub body and comes with a spacer for 8/9/10spd. -Karl
11/18/2020 -- Measured a used specimen during a wheel rebuild. This hub has a 35mm aluminum freehub body. The freehub body is laser engraved "AFG-T06051200012-B". This hub weighs 366g. -Karl
11/18/2020 -- Measured a used specimen during a wheel rebuild. This hub has a 35mm aluminum freehub body. The freehub body is laser engraved "AFG-T06051200012-B". This hub weighs 366g. -Karl