DT Swiss 350 130mm Rear hub
| Hub Data |
|---|
| Manufacturer |
DT Swiss |
|
| Model |
350 |
|
| Descriptor |
|
|
| Position |
Rear |
|
| Axle Type |
10mm |
|
| OLN |
130 mm |
|
| Spoke Interface Type |
J-Bend |
|
| Brake Compatibility |
rim brake |
|
| Drive Interface |
Shimano 11 road (36.75mm) |
|
| Internal Gearing |
none |
|
| Dynamo Type |
none |
|
| Spoke Hole Diameter |
2.5 mm |
|
| Left Flange Diameter |
46 mm |
|
| Right Flange Diameter |
46 mm |
|
| Left Flange Offset |
33.5 mm |
|
| Right Flange Offset |
16 mm |
|
| Mid-Flange Offset |
-8.8 mm (to the left) |
|
| Weight |
0 g |
|
| URL |
|
|
| Metadata |
|---|
| Hub ID |
307 |
|
| Record Status |
Public |
|
| Created |
May 24, 2016 12:42pm |
|
5/24/16 -- Measured by Karl. Nore: As with all DT hubs that existed as an 8/9/10 freehub body but now come with a Shimano 11-speed road freehub body, the OLN is actually 1mm more than nominal. This is entered as 130mm, but is actually 131mm. Flange spacing is correct for the actual 131mm spacing. If an 8/9/10 freehub were installed, the wheel dish (and flange offset) would move 0.5mm. -Karl