Hope Pro 2 Evo Fatsno FDS (front disc offset) 135mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Hope | |
| Model | Pro 2 Evo Fatsno FDS (front disc offset) | |
| Descriptor | ||
| Position | Front | |
| Axle Type | 9mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 57 mm | |
| Right Flange Diameter | 57 mm | |
| Left Flange Offset | 37.5 mm | |
| Right Flange Offset | 38.5 mm | |
| Mid-Flange Offset | 0.5 mm (to the right) | |
| Weight | 253 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Hub ID | 283 | |
| Record Status | Public | |
| Created | Dec 6, 2014 2:10pm | |
12/6/14 -- This is a new production (2014) hub measured and weighed by Karl. FDS refers to front disc rotor offset; RDS hubs are also offered. -Karl
HU2123 will convert this hub to a 15x150 standard (for Bluto suspension fork, Ice Cream Truck, or Blackborow) and does not require re-dishing the wheel because the kit provides a rotor spacer and longer rotor bolts that moves the rotor outwards the correct distance. I don't think this kit would work correctly with the RDS version of this hub because the rotor would end up about 5mm too far inboard to work properly with any 15x150mm fork. -Karl
HU2123 will convert this hub to a 15x150 standard (for Bluto suspension fork, Ice Cream Truck, or Blackborow) and does not require re-dishing the wheel because the kit provides a rotor spacer and longer rotor bolts that moves the rotor outwards the correct distance. I don't think this kit would work correctly with the RDS version of this hub because the rotor would end up about 5mm too far inboard to work properly with any 15x150mm fork. -Karl