Velo Orange Grand Cru High Flange Front 100mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Velo Orange | |
| Model | Grand Cru High Flange Front | |
| Descriptor | ||
| Position | Front | |
| Axle Type | 9mm | |
| OLN | 100 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.5 mm | |
| Left Flange Diameter | 62 mm | |
| Right Flange Diameter | 62 mm | |
| Left Flange Offset | 33.5 mm | |
| Right Flange Offset | 33.5 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 185 g | |
| URL | http://store.velo-orange.com/index.php/g... | |
| Metadata | ||
|---|---|---|
| Hub ID | 257 | |
| Record Status | Public | |
| Created | Apr 16, 2013 1:34pm | |
4/16/13 -- Everything is as measured on a brand new hub. Note that the actual measurements (62/33.5) differ slightly from what VO claims (61/32). Weight listed bere is without the included skewer. -Karl
---
6/26/19 -- VO's website still shows incorrect data. New QR 36h specimen has flange PCDs of 62mm (not 61). VO's center-to-flange appears to be to the inside face (32mm). Flanges are 3mm thick, so this should be about 33.5mm to the flange midpoint. -Karl
---
6/26/19 -- VO's website still shows incorrect data. New QR 36h specimen has flange PCDs of 62mm (not 61). VO's center-to-flange appears to be to the inside face (32mm). Flanges are 3mm thick, so this should be about 33.5mm to the flange midpoint. -Karl