NuVinci N171 135mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | NuVinci | |
| Model | N171 | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | threaded, standard (1.37x24) | |
| Internal Gearing | CVT | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.9 mm | |
| Left Flange Diameter | 148 mm | |
| Right Flange Diameter | 148 mm | |
| Left Flange Offset | 25.6 mm | |
| Right Flange Offset | 25.2 mm | |
| Mid-Flange Offset | -0.2 mm (to the left) | |
| Weight | 3850 g | |
| URL | http://www.fallbrooktech.com/docs/Nuvinc... | |
| Metadata | ||
|---|---|---|
| Hub ID | 199 | |
| Record Status | Public | |
| Created | Sep 16, 2010 7:56pm | |
Released in 2008. (surpassed by the much lighter and smaller N360 in 2010)
51mm chainline. Spoke hole diameter is a guess based on literature for the newer N360 model. Can we verify?
The 6-bolt disc adapter can be removed to expose splines for a Shimano Roller brake.
The N171 is easily identified by the lightening holes drilled through the flanges between spoke holes. The later model (N360) does not have these holes.
51mm chainline. Spoke hole diameter is a guess based on literature for the newer N360 model. Can we verify?
The 6-bolt disc adapter can be removed to expose splines for a Shimano Roller brake.
The N171 is easily identified by the lightening holes drilled through the flanges between spoke holes. The later model (N360) does not have these holes.