Phil Wood high-flange track 120mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Phil Wood | |
| Model | high-flange track | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 120 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | threaded, flip-flop (all combos) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 66 mm | |
| Right Flange Diameter | 66 mm | |
| Left Flange Offset | 29 mm | |
| Right Flange Offset | 29 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 417 g | |
| URL | http://www.philwood.com/wp-content/docs/... | |
| Metadata | ||
|---|---|---|
| Hub ID | 137 | |
| Record Status | Public | |
| Created | Feb 11, 2010 11:26am | |
measurements are valid for hubs made in 08/09
-----
10/10/18 -- Updated dims to match Nick's new hubs. Old PCD was 67, these are 66. -Karl
-----
10/10/18 -- Updated dims to match Nick's new hubs. Old PCD was 67, these are 66. -Karl