DT Swiss 350 (2021+) 157mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | DT Swiss | |
| Model | 350 (2021+) | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 12mm thru | |
| OLN | 157 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | Shimano Micro Spline (26mm) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 60 mm | |
| Right Flange Diameter | 50.5 mm | |
| Left Flange Offset | 41.1 mm | |
| Right Flange Offset | 27.9 mm | |
| Mid-Flange Offset | -6.6 mm (to the left) | |
| Weight | 285 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Hub ID | 1026 | |
| Record Status | Public | |
| Created | Aug 22, 2021 11:32am | |
| Contributed By | Karl | |
8/22/2021 -- Values from the DT spoke calculator. -Karl
NOTE: This entry is for the 2021+ version which has slightly different flange PCDs and spacings. Please check the hub you have before assuming these are the correct values based on spec/name alone! -Karl
NOTE: This entry is for the 2021+ version which has slightly different flange PCDs and spacings. Please check the hub you have before assuming these are the correct values based on spec/name alone! -Karl