SON Nabendynamo SON for Catrike 0mm Front hub
| Hub Data |
|---|
| Manufacturer |
SON Nabendynamo |
|
| Model |
SON for Catrike |
|
| Descriptor |
|
|
| Position |
Front |
|
| Axle Type |
20mm thru |
|
| OLN |
0 mm |
|
| Spoke Interface Type |
J-Bend |
|
| Brake Compatibility |
disc, 6-bolt |
|
| Drive Interface |
n/a (front) |
|
| Internal Gearing |
none |
|
| Dynamo Type |
6v 3w (16"-20") |
|
| Spoke Hole Diameter |
2.4 mm |
|
| Left Flange Diameter |
70 mm |
|
| Right Flange Diameter |
70 mm |
|
| Left Flange Offset |
16.3 mm |
|
| Right Flange Offset |
23.7 mm |
|
| Mid-Flange Offset |
3.7 mm (to the right) |
|
| Weight |
570 g |
|
| URL |
|
|
| Metadata |
|---|
| Hub ID |
337 |
|
| Record Status |
Public |
|
| Created |
Jul 18, 2017 1:28pm |
|
Unlike other dynamo hubs, this hub is rated for use in either rotation direction and can therefore be used on the left or right side of a trike. I entered the dimensions of the hub with it oriented as a right wheel (disc rotor to the left of the flanges). The wheel disassembled had an offset of 56.7mm from the registration flange to the centerline of the rim; recreating this offset exactly means you are NOT building a dishless wheel... The original wheel was not quite dishless either.
