Bontrager Jackalope [559] Rim
Rim Data | ||
---|---|---|
Manufacturer | Bontrager | |
Model | Jackalope | |
Descriptor | ||
ISO Size | ISO 559 (26" mtn) | |
ERD | 540 mm | |
ERD source | ||
Offset drilling | 6.3 L, -6.3 R | |
Rim Bias | -6.3 mm (to the left) | |
Outer width | 81.5 mm | |
Inner width | 75.2 mm | |
Overall height | 20.5 mm | |
Brake wall height | ||
Tire Type | clincher | |
Joint Type | Welded | |
Eyelet type | None | |
Weight | 850 g | |
URL |
Metadata | ||
---|---|---|
Rim ID | 341 | |
Record Status | Public | |
Created | Dec 5, 2014 11:06am |
12/5/14 -- Unable to measure ERD or weight or rim in a pre-built wheel, but we have some of these as bare rims that I assume I'll cross paths with eventually. An unusual innovative design that uses a mostly single wall rim with a small isolated box section slightly offset from center to house the spoke nipples and add rigidity. -Karl
12/6/14 -- I measured the ERD at 540mm . The spoke holes are angled quite aggressively. Weight of bare rim is ~852g. -Karl
12/6/14 -- I measured the ERD at 540mm . The spoke holes are angled quite aggressively. Weight of bare rim is ~852g. -Karl