Campagnolo 8spd road (vintage) 130mm Rear hub
Hub Data |
---|
Manufacturer |
Campagnolo |
|
Model |
8spd road (vintage) |
|
Descriptor |
|
|
Position |
Rear |
|
Axle Type |
10mm |
|
OLN |
130 mm |
|
Spoke Interface Type |
J-Bend |
|
Brake Compatibility |
rim brake |
|
Drive Interface |
n/a (front) |
|
Internal Gearing |
none |
|
Dynamo Type |
none |
|
Spoke Hole Diameter |
2.5 mm |
|
Left Flange Diameter |
45 mm |
|
Right Flange Diameter |
45 mm |
|
Left Flange Offset |
36.1 mm |
|
Right Flange Offset |
16.7 mm |
|
Mid-Flange Offset |
-9.7 mm (to the left) |
|
Weight |
420 g |
|
URL |
|
|
Metadata |
---|
Hub ID |
235 |
|
Record Status |
Public |
|
Created |
Aug 16, 2012 3:31pm |
|
Don't be lazy and trust these measurements blindly; measure your damn hub. I have no idea what model or year or series this hub is. It's unmarked (except for dust cap) and definitely an 8spd road hub. Quite heavy by modern standards, but very well designed and built. Uses four 6001-sized cartridge bearings. Steel freehub body, steel axle, end caps that screw into the axle and have 17mm hexagonal wrench flats. Dust cap on non-drive side says "CAMPAGNOLO -- MADE IN ITALY".