Campagnolo road (vintage) 100mm Front hub
Hub Data |
---|
Manufacturer |
Campagnolo |
|
Model |
road (vintage) |
|
Descriptor |
|
|
Position |
Front |
|
Axle Type |
9mm |
|
OLN |
100 mm |
|
Spoke Interface Type |
J-Bend |
|
Brake Compatibility |
rim brake |
|
Drive Interface |
n/a (front) |
|
Internal Gearing |
none |
|
Dynamo Type |
none |
|
Spoke Hole Diameter |
2.3 mm |
|
Left Flange Diameter |
38.4 mm |
|
Right Flange Diameter |
38.4 mm |
|
Left Flange Offset |
34.1 mm |
|
Right Flange Offset |
34.1 mm |
|
Mid-Flange Offset |
0 mm (centered) |
|
Weight |
153 g |
|
URL |
|
|
Metadata |
---|
Hub ID |
209 |
|
Record Status |
Public |
|
Created |
May 19, 2011 3:24pm |
|
Mystery vintage of older Campy road front hub brought in by customer to be built into a new wheel. Outer edges of spoke holes are counterbored slightly with a 5mm diameter. Has a chromed steel clip covering an oil port at the center, with a slightly raised band along either side of the clip stamped with "CAMPAGNOLO ITALY" and "BREVETTI INTERNAZIONALI" on opposing sides. Axle has a keyway cut into it for keyed washers between cone and locknut. Weight of 153 grams is without a skewer.